Wireless Controls & Automation
  Home Contact Shopping Cart   Site Map
 Wireless Remote Tank Level Monitoring and Control System, Analog input 4-20mA 

88  Please request price  



938487  Please request price 


Command operation: Manual or Automatic

Manual: Controlled by the operator

Automatic: Level sensor via transmitter PLC

Blue light indicates the pump status
Red light indicates the tank level is low
Green light indicates the tank level is high


5 Miles ( 8 km ) line of sight

Optional 10 Miles (16 km) line of sight


    1  Base Transmitter single  4-20mA or 0-10VDC  input
    1  Base Receiver single channel Relay output
    2  Yagi Antenna 7 dBi with 10ft coaxial cable & RF connector
    NEMA 4,  IP65 ABS plastic enclosure, & wiring diagram 


Operating Voltage: 12  VDC  and  24VDC
Temperature: -4 to +140 F (-20 to +60 C)
Compliance FCC CFR part 15.247 ISM
Carrier Frequency 27MHz or 433MHz  industrial ISM band
 Codes: DIP switch programming 16 BIT Digital
Current Drain 120 mA, standby, 400 mA operation
Data Input TX  4-20mA or 0-10vdc 1 Channel
Relay Output RX 10 Amp max  250VAC N/O  class2 pilot duty
Antenna Imp 50 Ohms  Antenna optional
Dimensions: 11.81 x 7.87 x 6.29 in. / 299.97 x 199.90 x 159.77 mm, each enclosure
Weight 8 lb. (4 Kg) each
Enclosure  NEMA 4,  IP67  ABS plastic  waterproof

  938488 only
Receiver incorporates:
Selector switch:  Auto, Off and Auto
Indicators for tank level and pump status,


Wireless Remote Tank Level Monitoring and Control

Operates with any  4-20 mA or 0-10 VDC level transmitter

Available in 4, 6, 10 standard stages or multiple stages by request

Multiple receivers for remote monitoring, alarm, or notification.

■ Easy installation, No programming
■ Safe no interferences or hacking, No internet or GSM
■ Operates on your own carrier, FCC ISM band, No fees

Online request form 


DISCLAIMER: Contact a licensed professional for your project. 

     Copyright   Electrodepot. All rights reserved