Wireless Controls and Automation

 

 

930080 series

   
 
Industrial Wireless Radio Controls  Panel Mount Ready
 
Performance
■  1 Mile (2.km) line-of-sight w 938432 ant.
■  3 Miles (5 km) line-of-sight w 938433 ant.
■  1200. f (300.m) in-building range 3dbi ant.
■  Input Dry isolated contact N/O
■  Relay output SPDT 6 Amp 240V/30V
   

Installation features
■  Operates on license-free 433 MHz ISM band
■  Easy installation,
No programming required
■  Panel mount or clip onto DIN-35mm rail
 
 Operation   Transmitter Receiver
 Continuous: Close switch
Open switch
Relay ON
Relay OFF

.

Single Channel 12VDC.

931281 Single (1) Channel  12VDC   
Transmitter - Receiver
Mounted on  DIN Rail    
 
 
Picture  12V
 

931281    $799.99

Add the Antennas


Two Channel 12VDC.

931282  Two (2) Channel 
12VDC   
Transmitter - Receiver
Mounted on  DIN Rail   

 
Picture   12V
 
931282  $849.99

Add the Antennas


Four Channel 12VDC.

931284 Four (4) Channel 
12VDC   
Transmitter - Receiver
Mounted on  DIN Rail  
 
Picture   12V
 
931284  $999.99

Add the Antennas


Single Channel 120/220VAC.
932281 Single (1) Channel  120/220VAC   
Transmitter - Receiver
Mounted on  DIN Rail
 
Picture  120/220V
 
932281  $849.99

Add the Antennas


Two Channel 120/220VAC.
932282  Two (2) Channel  120/220VAC   
 Transmitter - Receiver
Mounted on  DIN Rail   
 
Picture   120/220V
 
932282  $999.99

Add the Antennas


Four Channel 120/220VAC.

932284 Four (4) Channel  120/220VAC   
 Transmitter - Receiver
Mounted on  DIN Rail  
 
Picture   120/220V
 
932284   $1,089.99

Add the Antennas


   Specifications      Digital Transmitter
Supply power 12 VDC @ 400 mA
Inputs  N/O Normally Open, digital dry contact
Transmitter power per FCC Part 15.249,  50mV/m @ 3m
Transmission Digital Encoded Gaussian_frequency-shift_keying
Channels 16 addresses per system  GFSK
Input Wiring Din Terminals,  Dry Contact
Response Loop 500 msec
Weight 0.8 lb (0.40kg)  each unit
Dimensions 4.50 x 3.50 x 3.25 in. / (114.30 x 88.90 x 86.75 mm)

   Specifications      Digital Receiver 
Supply power 12 VDC  @ 300 mA
Output   Relay SPST  contact 6.Amp, 30V/240vac  Class 2 pilot duty
Frequency 433 MHz  • License free Industrial ISM band
Configuration DIP switch factory preset
Compliance FCC CFR part 15.247, 95 sub E
Wiring Components mounted on 35mm DIN rail
Antenna Z 50 Ohm SMA RF connector
Ambient temp  14 to 140 F (-10 to 60 C)
DIN Rail   IP22, UL94-5VA, DIN mount 35mm or panel mount

Specifications

Applications:
Industrial Monitoring, Pump control, Monitor remote instruments, sensors, Lighting, Building automation, Packing and mobile system, PLC ext SCADA, Factory process control and alarms. Generators, Wire replacement

Application wiring example*

   Antenna Selection ( TWO antennas are required )



938433  Yagi antenna 12 E

 14 dBi  3 Mile+
 Length: 43", Weight: 3.lb

 with 10 ft coax cable and connector
 

$279.99 

 

938432   Yagi antenna 3 E

7 dBi  1 Mile+
Length: 18", Weight: 1.lb
with 10 ft coax cable and connector

$149.99 

938438  Omni directional antenna

3 dBi  1 Mile+
Length: 37", Weight: 3.lb
with 10 ft coax cable and connector

$199.99

938091,   7" Omni Antenna 

0 dBi Short range
5ft coax cable
  SMA

$29.99

 Accessories:
933020 Miniature Contactor

20A, 3 Pole, 12VDC Coil
2HP @240V, 7.5HP @460V
1HP @120V,  
4 KW@ 220V
20Amp AC-1, 12Amp. AC-3
Screw Terminals, 600V, 1 N.O. Aux.,
DC Coil Current : inrush/sealed  250mA
Dimension: 1.7 x 2.5 x 2.3 in 
 (45 x 64 x 58 mm)
Surface or DIN rail mountable

12VDC Coil   $49.99 

Series 931201  General purpose Relays

SPDT
Electromechanical Relay,
DIN Rail,
Contact 16A @240V
Coil Selection:  12, 24, 120V

  $39.99

Mechanical Float Switch 

930650     $69.99 

 

DISCLAIMER:  Radio control equipment in not to be used in life safety.  -  Radio Installations shall be performed by a certified professional.

     Copyright   Electrodepot. All rights reserved