4 Pole Lighting Contactors 120v

30A 3Pole

63A 4Pole

63A 4Pole AX

50A 4Pole DP

100 AMP LIGHTING CONTACTOR 4 Pole 120V Coil (Silent Operation)

100 Amp. 4 Pole
NORMALLY OPEN --] [--

Normally Open (N.O.) contacts
For 120/220/277/Rated 500V,
10HP @240V, 30HP @460V
60A. Ballast, 15 KW@ 220VAC
100Amp AC-1, 60Amp AC-3
Coil: Inrush 106VA, Sealed 22VA
Certified CE, EN, IEC 61095. Not UL listed
Power Lug Terminal Capacity AWG # 2/0
Coil 110/120VAC Add DIN rail
Dimensions

934100 N/O

Contactor 934100A N/O
with Auxiliary Contact

1 NC 1 NO, Rated 5 Amp, Pilot Duty Class 2

100 Amp.  4 Pole
NORMALLY CLOSED   --] /[--

Normally Close (N.C.) contacts
For 120/220/277/Rated 500V,
10HP @240V, 30HP @460V
60A. Ballast, 15 KW@ 220VAC
100Amp AC-1, 60Amp AC-3
Coil: Inrush 106VA, Sealed 22VA
Certified CE, EN, IEC 61095. Not UL listed
Power Lug Terminal Capacity AWG # 2/0
Coil 110/120VAC   Add DIN rail
Dimensions

934101 N/C

Contactor 934101A N/C
with Auxiliary Contact

1 NC 1 NO, Rated 5 Amp, Pilot Duty Class 2

120VAC $349.99

934100

SPECIFICATIONS

range of product

Modular iec

product identification

934100

product or component type

Contactor

device short name

HC1-100

device application

Heating-low inductive load

Poles

4P

[Ie] rated operational current

100 A AC-7A

pole contact composition

4 NO

network type

AC

utilization category

AC-1 conforming to EN 60947-4-1
AC-7A conforming to EN 61095
AC-7A conforming to UTE C 61-481

control type

Wired Remote control

[Uc] control circuit voltage

Selection 110.. 120 /220...240 V AC 50/60 Hz

Main

network frequency	50/60 Hz
[Ue] rated operational voltage	400 V AC 50/60 Hz
Ie maximum current	AC-1: 100A at 400 V AC 50/60 Hz
[Ui] rated insulation voltage	500 V AC 50/60 Hz
[Uimp] rated impulse withstand voltage	4 kV
control signal type	Maintained
switching frequency	100 switching operations/day
local signaling	Action indicator
hold-in power consumption in VA	22 VA
inrush power in VA	106 VA
mounting mode	Clip-on
mounting support	35 mm symmetrical DIN rail
dimensions	Dimensions
height	85 mm
width	108 mm
depth	60 mm
color	White
electrical durability	30000 cycles IEC 61095 400 V AC 50 Hz AC-7A
connections - terminals	Control circuit: terminals2 cable(s) 1.5 mm² rigid Control circuit: terminals1 cable(s) 1.5…2.5 mm² rigid Control circuit: terminals2 cable(s) 1.5…2.5 mm² flexible Power circuit: terminals1 cable(s) 6…35 mm² solid or flexible
tightening torque	Power circuit: 3.5 N.m Control circuit: 0.8 N.m A1 / A2
product compatibility	934002 auxiliary contact no/nc ICTs schneider 5TT siemens

standards	EN 61095 IEC 61095 UTE C 61-481
noise level	30 dB
heat dissipation	4.2 W at 50/60 Hz
IP degree of protection	IP20 conforming to IEC 60529 IP40 (modular enclosure) conforming to IEC 60529
pollution degree	2
tropicalisation	2 conforming to EN 60947-4-1
relative humidity	95 % at 55 °C
operating altitude	2000 m
operation air temperature	-5…60 °C
ambient air temperature for storage	-40…70 °C