 |
Designer humidistat provides
control of humidifying or dehumidifying equipment with the
same control. Flush mounting on walls or panels.
Contact Rating 24 to 230 VAC 5. Amp. - 50
VDC 1.Amp |
 |
Humidistat provides
control of dehumidifying equipment with the
same control. Flush mounting bracket to fit standard
outlet box supplied. Field-adjustable high and low
stops. Stops can be set for locked settings.
Contact Rating
120VAC 6. Amp. 230 VAC. 3 Amp. |
 |
Duct Mount sensor probe Horizontal or
vertical mount Humidistats ON/OFF single-stage control of humidifiers,
dehumidifiers, fans, heaters, valves, solenoids, compressors, relays, and other
electrical components.
Applications:
clean rooms, food production, sterilization processes,
greenhouses. |
 |
Duct
Humidity Transmitter
HT533D 0-100% relative humidity, output 0-10 VDC
Combines humidity and temperature sensors |
 |
Sealed Mechanical float switch.
The switch can
be installed by tie-wrapping it to a support
structure or by adding an external weight to the
cable. SPDT contacts are included so the unit
can be used to empty or fill a tank or sump.
|
 |
Electronic
Water detector control relay for detecting a rising water
level. The relay is
normally energized when the power supply is
switched on and no water is present. When water
rises up the side of the box to reach the
switching level, the relay drops out. This
sequence is failsafe, allowing each model to be
used as a water spillage alarm switch or to turn
off a valve or stop an air conditioning unit
before the water overflows its containment.
|
Home 
Checkout 
Dealers 
