|
|
|
Specifications
Operating
Voltage: 12 to 15.o VDC
Operating
Temperature: -4° to +140° F (-20° to +60° C)
Receiver Type:
Digital Superheterodyne
Sensitivity: -118
dB (minimum)
Selectivity: 6
KHz
Carrier
Frequency: 27,255 MHz
Number of Codes:
65,536
Code Setting
Method: DIP switch programming
Data Input:
Alarm, restore, status, and low battery
Status Exception
Time Frame: Four hours
Dimensions: 4.25 in L x 2.5 in W x 6.25 in H (108 x 64 x 159
mm)
Weight: 1 lb.
(0.454 Kg)
Current Drain:
-25 mA, typical standby 65 mA alarm @ 12 VDC
Outputs: Alarm - form "C" relay per channel
Status
exception -
one open collector output per receiver;
Low Battery - one open collector output per receiver (Audio and signal strength test points)
Antenna Impedance: 50 Ohms
Whip Antenna required |
|
Features |
Output provides isolated N/0 and N/C
relay contacts capable of switching a maximum of 1 Amp @ 32 VDC. Optional
Power
Relay
Electronic Latch
control
Multifunction relay-timer
Over 64,000 Codes,
Weather-Resistant
Case, Power On and RF
Activity Indicators
Required: Whip Antenna 2 Miles of
Line-of-Sight range
Up to 10 Miles with
Long Range Antenna
.
| |
|
Home 
Checkout
Dealers 
1 Channel receiver
