|
|
|
| |
Electronic
latch control 12, 24 110/220 VAC/DC |
|
|
Model: 934757
- 4160 |
 |
.
11 pin plug-in
DIN mount socket (included)
Din Latch Relay
|
|
Momentary-to-Toggle (Bi-Stable) Switching
Converter
TWO wire latch control (
toggle)
The LATCH module is an auxiliary device designed
to allow easy and reliable arming/disarming
momentary, two wire start stop circuit, or with
hand-held wireless remote controls. It may be
looked upon as an easy-to-use, cost-effective
"momentary-to-toggle (bi-stable)" switching
converter.
Momentary closure of terminals 2 and
5
will latch
A subsequent momentary closure will unlatch
Reset the Toggle relay by removing power from
terminal 2 or 10
 DIN Mount version |
-
The LATCH relay provides N.O. and
N.C. outputs.
-
Operating power - 12 VDC 24 VAC/DC
and 110/220 VAC
-
Current drain -
less than 1mA
(unlatched), 60 mA (latched).
-
Relays switching capability – 10A /
250VAC.
-
2 x 1.3 x 1.7 inches
( 50 x
35 x 40 mm)
-
Power
ON
and Latched
indicator
 |
|
934135 Multifunction Latch DIN
-
The LATCH relay provides N.O. and
N.C. outputs.
-
Operating power - 12, 24
VDC
& 24, 110, 220 VAC
-
Current drain - less than 1mA
(unlatched), 60 mA (latched).
-
Relays switching capability – 15A /
250VAC.
-
UL listed
E308660, CE approved
-
DIN mount
-
Power
ON
and Latched
indicator
Momentary closure of terminals A1 and
S
will latch the relay.
A subsequent momentary closure will unlatch
the relay.
Reset the Toggle relay by removing power from
terminal A1 or A2
Note: The LATCH module is also suitable for
remote control
operations.
The relay provides N.O. and N.C. contacts, and
can therefore be used with a
wide variety of
control applications.
Application
Examples |
 |
|
|
| |
DISCALIMER The
applications shown here are referential help examples and ideas only, and are
not intended for actual constructions plans
Contact a licensed professional. Electrodepot assumes no responsibility of the use of this
drawings |
|
|
Home 
Checkout
