Single shot relay plug in

Used to send one one pulse only in the event of a contact closure
When the coil is energized the main contacts will close for 3 seconds and open gain until a new contact closure occurs.
Use full for the activation or pulse transmission in wireless remote controls.
The relay provides N.O. and N.C. contacts, and can therefore be used with a wide variety of control applications

Features - Specifications

Replaces the normal ON to one pulse circuit SPDT relay contacts.
Momentary or continuous closure sends one pulse of 3 seconds
Reset time 20 ms.
Operating power - 12, 24 VAC/DC
CCurrent drain - less than 1mA , 3 seconds (pulse) 30 mA
Relays switching capability – 10 A 250 VAC.
11 pin Octal socket with DIN mount included
Relay coil terminals 2 and 10

Operation: Upon momentary or maintained power application to the coil the output contact is energized for the interval time. At the end of the delay the output de-energizes.